Dear Customers: Pls call +86 156 3338 6789 send to if you get no reply by Enquiry Online.
We have high efficient & energy saving 1.5 ton diesel induction furnace,two electric furnace with 500 kg capacity,200 kg heat preservation
furnace and 500 kg heat treatment furnace.

Cast alloys with 5% Cu, often with small amounts of silicon and magnesium.
Cast alloys with 7-8% Cu, which often contain large amounts of iron and silicon and appreciable amounts of manganese, chromium, zinc, tin, etc.
Cast alloys with 10-14% Cu. These alloys may contain small amounts of magnesium (0.10-0.30% Mg), iron up to 1.5%, up to 5% Si and smaller amounts of nickel, manganese, chromium.
Wrought alloys with 5-6% Cu and often small amounts of manganese, silicon, cadmium, bismuth, tin, lithium, vanadium and zirconium. Alloys of this type containing lead, bismuth, and cadmium have superior machinability.
Durals, whose basic composition is 4-4.5% Cu, 0.5-1.5% Mg, 0.5-1.0% Mn, sometimes with silicon additions.
Copper alloys containing nickel, which can be subdivided in two groups: the Y alloy type, whose basic composition is 4% Cu, 2% Ni, 1.5% Mg; and the Hyduminiums, which usually have lower copper contents and in which iron replaces 30me of the nickel
aluminium castings hook
aluminium locking elbow
aluminium casting tee
aluminium casting coupler clamp
aluminum casting spigot
| Information | Aluminium-Copper | Customers| Enquiry-Online| Site Map | Contact Us |
Copyright Smart-Keen Non-ferrous Alloy Foundry Co., Ltd   All Rights Reserved
Web Designed and Managed by C.S.W.